Home Page News Search Contact Us Language Bar فارسی English
Conceptual Question No.5 - Reactive energy
As you know the meaning of recorded KWH by electrical energy meters is the actual amount of produced energy by power source or the actual amount of consumed energy by loads in power system.
Well, what is your opinion about recorded KVARH in power systems? Whether is the reactive power related to actual energy? Whether is the recorded KVARH equal to actual exchanged energy between source and loads frequently? What is the meaning of reactive power or energy term?
Author : Hamid - From: Iran
Mon, September 7th, 2009 - 13:08
If for the active power (correctly the energy) exists a net flow from one point of the network to another, for the reactive power there is a continuously flow back and forth (to and fro), but the net flow is zero for a complete cycle, as the amount of energy flowing in one direction for half a cycle is equal to the amount of energy flowing in the opposite direction in the next half of the cycle. The reactive power is exchanged by different parts of the network – capacitors and reactors – permanently, but is never consumed or produced. In reality, we can say that this reactive power is produced once, when the network is energized (after a collapse) and the same reactive power is consumed once, when the network collapses again. In between these two major events, the reactive energy stays constant. Of course the situation is changing when equipment is switched on or off.

It is customary to call the first part of (1) the instantaneous active power and the second part of (1) the instantaneous reactive power. There is a fundamental difference between the two powers. The active power oscillates around an arbitrary average value while the reactive power oscillates around a zero average power as the average value of a cos and sin function is zero. This observation is valid under any conditions as long as the oscillations are sinusoidal. For a non-sinusoidal regime the problem is much more complicated and is not yet fully solved.
As is not practical to work with instantaneous quantities because they are difficult to measure, averaged values are introduced. The average value of the instantaneous active power is called the active power and is given by

P =VI cosø

where V and I are the rms values. This quantity is obtained from averaging in time the first part of (1). Following the same method for the instantaneous reactive power, the average is zero and therefore is useless to introduce a quantity that is always zero.
Instead, another quantity is introduced to describe the instantaneous reactive power that is transferred to the network and this quantity is the maximum of the instantaneous reactive power,

Q = VI sin ø                                      

which is exactly the second part of (1) without the sin of the time. In this way the symmetry between the active and reactive power is broken and therefore P and Q do not have the same meaning as it is inferred in many textbooks. This is the root of the misconceptions about reactive power. The above definitions are summarized in table

It can be seen from the table that the active power describes an average power while the reactive power describes the maximum of the instantaneous power. As a consequence the two concepts cannot be treated on equal foot as they are not similar. The simplest solution to this problem would be to avoid the usage of reactive power term for Q but perhaps this choice would be difficult to be implemented in practice.
Author : Hamid - From: Iran
Thu, October 22nd, 2009 - 15:26
"The reactive power is exchanged by different parts of the network – capacitors and reactors – permanently, but is never consumed or produced"

This is not true. The reactive power flows through resistive components like wires, switches and transformers and dissipates in the form of heat.  
Author : Martin - From: Estonia
Thu, October 22nd, 2009 - 18:13
Quoted by Martin :"The reactive power is exchanged by different parts of the network – capacitors and reactors – permanently, but is never consumed or produced"

I think it is true except in case of starting or collapsing of power system.
Author : Hamid - From: Iran
Tue, November 10th, 2009 - 18:47
If you suppose at starting or collapsing of system , you have consumed reactive power , in fact you have assumed network is not an ideal capacitor . Even , in this case , what has been consumed is not reactive power in reality it is active power but slightly .  
Sun, February 13th, 2011 - 18:55
The kwh produced by the power source is the sum of kwh consumed at the metering point(by the consumer) plus the kwh lost in transmission/distribution lines,switchgear,transformer,corona etc 
Author : Sinnadurai Sripadmanaban - From: Srilankan
Submit Your Answer

Change Language :